Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. With the added option to link to an Ghost app and GPS tracking system, which can notify you via phone in the event that your vehicle is damaged with or stolen.
Installing an Ghost immobiliser is fairly simple for the qualified technician. The right tools, insulation tape, and heat shrink tubing are essential.
Getting Started
Ghost immobilisers are a great alternative to physical theft protection devices such as car alarms and wheel locks. They protect your vehicle without the use of LED indicators or key fobs. They connect directly to the ECU CAN data network and can only be activated after entering a PIN code. This provides a higher level of security against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high degree of agility and accuracy. It can be a bit like tiptoeing through the minefield. A single mistake could cause irreparable damage to the circuits of your vehicle's electrical system. It is crucial to know the procedure for installing and prepare your vehicle in a timely manner.
You will need to remove interior panels from the vehicle to make space for the immobiliser. Once you've found the ideal location to hide it, secure it in place by using cable ties to stop it from being taken away or altered. Clean up your wiring by tying loose wires down and using insulation tape to cover exposed connections. This can help minimize the risk of short circuits that are not intended to be there, while improving the aesthetics and decreasing the chance of tampering from thieves.
Finally, identify a source of constant 12V power and an earthing point for the ghost immobiliser. Once you've identified these connections, test the power cables using a multimeter, to ensure they're delivering the same voltage. Then, connect the CAN H and CAN L wires from the immobiliser to the designated power source and the grounding point.
Once you've made all of the necessary connections It's crucial to double-check them and inspect the immobiliser for indications of corrosion or damage. You should also test the system to ensure it is working properly by entering a PIN number and then starting the engine. This should be a regular part of your routine since it allows you to spot any intermittent problems early. Regular testing can help prolong the life of your device and keep it performing at its best.
Preparing your vehicle
The installation of the Ghost immobiliser is a complex task that requires tools and understanding. A wiring diagram of the vehicle is vital to locate the right wires and making precise connections, while a multimeter can help verify electrical values and ensure safety. Cable ties and insulation tape can be used to guard the connections from damage and to keep them neatly secured. A user's manual will give you specific instructions specific to your Ghost Immobiliser model.
Once installed the ghost immobiliser can prevent unauthorised engine starts by requiring the driver to enter a unique code using the buttons on the console or steering wheel. The code can be altered at any time by the owner by hand or remotely using an app on mobile. The device is also silent and undetectable by thieves, since it doesn't emit radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals generated by the ECUs and prevents the engine from starting when the ECU detects a false signal. The system is tamper-proof as well as weatherproof, with no key fobs or LED indicators to attract the attention of thieves.
It can be placed behind or in a less noticeable location so that it's not obvious to thieves and won't hinder vehicle's performance. It can be placed in a small jar, so it is less likely to be noticed by fraudulent salespeople when they test drive.
Its low-profile operation and integration with the vehicle's CAN bus network make it an effective deterrent against modern methods of car theft, including key cloning and signal relay attacks. Combining the system with other security measures will create a formidable barrier that can deter even the most persistent thieves. This is why more insurance companies are advocating or even requiring ghost immobilisers be fitted, as it will significantly lower monthly premiums.
Making Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers operate in a quiet manner to prevent them from knowing when your vehicle is turned on. They also block high-tech methods employed to steal vehicles, like OBD port hacking. Installing them without leaving permanent marks on your vehicle is a great alternative for those planning to sell the car in the near future.
Full File is among the most recent and most reliable options to stop car theft. It uses the CAN data network to deactivate your engine and generates a pin code that only you know, which means it's difficult for criminals to detect. It can be used on a wide range of automobiles, and it can work with many features already installed like car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you opt to use an Ghost immobiliser for your vehicle, make sure to consult the wiring diagram to determine the wires that connect. Double-check the locations of these wires to ensure accuracy and mark them using tape or labels to aid in keeping track of them. You'll also need to locate a source of continuous power (12V) and a grounding point to the system. Once you have these in place, you can begin to make the connections needed to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless you enter a pin code through the buttons on the steering wheel or dashboard. This will stop ECU hacking or key cloning and other methods of theft from vehicles. In addition, it could be used in conjunction with other Thatcham-approved security devices, like alarms and tyre clamps to give your car an additional level of protection.
As the UK automotive industry continues to grow as do the options available for securing your vehicle. There are many ways that thieves can get into your car and steal it, so it's important to do all you can to ensure that it isn't taken away. Ghost immobilisers are an increasingly popular option for car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using an CAN network. This prevents the engine from being started until the PIN code has been entered. This makes it difficult for thieves to steal your key fob to open your vehicle, and harder to disable the system through hacking its electronic.
Ghost Immobilisers are also able to be utilized in conjunction with GPS tracking devices that will assist you in tracking your vehicle and track it in the event of theft. This feature is not a common option for security products that are available from the market, but it's a great option to increase your security and provide assurance that your vehicle is protected.
In addition to providing enhanced security and security, the Ghost-II immobiliser offers a convenient user experience, removing the requirement for additional key fobs and devices. It is simple and intuitive PIN code entry that can be integrated seamlessly into your daily routine. It also comes with convenience features and deactivation settings that allow you to temporarily disable the immobiliser in order to park or service your vehicle.
Make sure you have the tools you need and familiarise yourself first with the wiring of your vehicle. A basic set of tools will allow you to create precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat-shrink tubing is essential to shield connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in an area that is well-lit, and wear safety equipment when working with electrical components and tools.
After you've completed the installation, you should test the Ghost immobiliser to ensure that it's functioning properly. You should first try to start the vehicle without entering the PIN. If this fails then you'll need to test again and examine the connections more carefully.
The Ghost Immobiliser, unlike other security systems, is a secret device which cannot be detected by thieves. It is also more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA acknowledged and approved by a few insurance companies, making it an investment that is cost-effective and can give you the peace of mind you deserve.